1 Ski Boot Ski Gear

An ironing board is, without doubt, a mundane item of household equipment to which the majority of people give very little thought. However, it is an essential item for any household and, if you choose the wrong one, then you might end up with badly pressed garments, take more time than you need to when ironing and even put unnecessary strain on your back.

Nowadays, the majority of people use steam irons – or even steam generator irons which are growing in popularity due to the fact that they can reduce the amount of time required for ironing. For both of these types of irons an ironing board which has a surface of open mesh construction is desirable. The mesh structure allows the steam to pass through the board, which helps to avoid condensation and soggy garments and ironing board covers when ironing large amounts of items.

The cover of the ironing board should present a smooth surface to facilitate ironing. It should be secure and not prone to slipping. An elasticated cover, possibly with one or two cross-ties at the centre, is generally a good design which won’t move about as you iron. A metalised cover will reflect some of the heat and this will help to smooth the underside of the garment whilst the top surface is being ironed.

The shape and size of the board will depend upon what you generally iron. A smaller board may be easier to manipulate and store – but it will generally require more repositioning of the item being ironed. A good taper on the pointed end will be useful for getting into corners – the shoulders of shirts and blouses for example – and will also be good for collars.

Scissor action legs which allow you to adjust the height of the board are pretty much standard these days. Make sure that you set the board height at a level that’s comfortable for you and doesn’t strain your back. If you’re the only one who irons (I bet you are) then a position marker is always useful. If you like to sit down whilst ironing then choose a board which has curved legs so that your knees don’t bang against the legs when you’re sitting down. Whatever type of legs you go for, they should provide good support and give you a stable platform to iron upon. A broad T-piece foot or splayed feet joined by a connecting bar usually works well.

The support for the iron should be strong enough to support the iron’s weight. For a traditional steam iron a wire frame type of arrangement is generally sufficient. Due to their large base units, steam generator irons can be quite a bit heavier than normal steam irons. A slightly longer board which just uses a heat resistant plate on its surface may be better for this type of iron. Alternatively, the base unit could be placed on the floor – as long as the connecting hose between the base unit and the iron is long enough to allow this.

Don’t waste hours on a thankless task like ironing. Cut your time in half with a Tefal steam generator iron – you’ll wonder how you ever got by without one.

Helpful Articles