1 Ski Boot Ski Gear

In a nutshell, ‘Green Energy’ utilises natural resources such as sunlight, wind, tides and geothermal heat to provide our daily energy requirement. They are considered ‘Green’ because they are environmentally friendly. It is easy to think that we may be travelling back in time when we think of items such as wind power and windmills. However, it is the result of eco-efficient and planet friendly options that this process is maintained.

It is the use of simple renewable energies such as Solar Thermal and Solar Water Heating Collectors, that suits the home environment. It is equipment such as Photovoltaic Panels (PV’s) that develop electricity through suitable roof-panels. Biomass Energy is the next phase, and this involves Fuel, Pellets, Stoves and Boilers burning Wood. Of course, then there is the heating from the Sun – often just called Ground Source Heat Pumps. When we think about Wind Power and Hydropower we have two of the more common forms of energy generation.

Thermal Energy Systems: This technology is based around two core types of system. Firstly, there are elements that absorb energy from the sun and create hot water – known as Solar Water Heating Collectors. Added to this is the generation of electricity from solar radiation – known as Photovoltaism, or more commonly Solar Electrical panels. To get the best results these panels need to be south facing at an angle of around 30 degrees from horizontal, and away from blockages.

As a result, Solar Water Power is often considered the most common form of Solar Energy in the UK. Solar Water heating systems are extremely important – and can provide over half of the hot water needs for houses within the UK. The cost of fitting depends on whether you do it yourself (500 to 1500 pounds) or whether you get a professional fitter – in which case it will cost between 2-5k overall.

Biomass Energy: This term encompasses all forms of natural products – such as plant and animal material. Considering its ability to produce energy in the form of heat and electricity, this type of energy is extremely flexible. Furthermore, within the European Markets, the UK is one of the central producers of Biomass fuels. One of the main factors of this style of energy is the result without the impact on C02. To that end, many wood crops come from sustainable sources (as one tree is felled, another is planted in its place; thus the new tree absorbs the CO2 produced during the heating process.)

‘Energy Crops’ trees such as Willow and Poplar play a major part in the process – under the banner of Short Rotation Coppice (SRC). Perennial grasses also produce a high yield of dry matter. Within this process also sits the lesser known Agricultural and Municipal Wastes. Agricultural Waste is commonly formed as a by-product of traditional agricultural work. Another biomass source is that of municipal waste – and this comes from recycled wood or food.

Geo-Thermal Energy Systems… This is primarily the heating of the Earth (mainly from the sun) and can be utilised in electricity and warm water production. Heating or cooling properties in the UK can be achieved using the ground source heat temperature of around 12 degrees centigrade. Whilst these heat pumps require energy to operate, their rate of return is excellent – being four units produced for every one unit used. Heat source pump energy can go one step further (by gaining a 100 percent return) if the energy to power them comes from items such as wind turbines or solar electrical panels.

Systems Based On Wind Energy: When you consider the milling of grain and pumping of water, it is easy to see how long wind energy has been with us. Whether to your home or to a local grid, when the energy has been generated it must be delivered to a point of usage – and cannot be stored. To be fair, the UK has the highest level of wind generation within Europe. It is interesting to note that whilst we can produce 10 percent of our entire power requirement from wind power, at present we only produce 1 percent. Rather than electricity production running at 2-10 p per kWh, it could be run at 2p per kWh. Therefore, recovery of cost takes approximately 6-9 months overall.

Then there is Hydropower – something within Europe that the UK excels in. Although new in its approach, the act of harnessing energy from water has been going on for a long time. In total, this could produce something like 2 percent of all electricity required in the UK.

Using a turbine, a Hydropower system can transform the energy of water into other forms. No water reservoirs are required – as the turbines either run through a water drop-off system or the natural power of the river. It is by using the eroded national distribution systems, that allows for outdated sluices and dams to be used by techniques known as ‘Micro-Hydro’. Having said that, this process could still generate 200mW of the National Capacity. When considering the installation cost of items such as this, we’re looking at somewhere between 200 pounds and 3k per kW of energy created.

It can be seen that the route to ‘Green Energy’ is growing considerably, especially in light of the need for increasing energy outputs throughout the Western World. The UK domestic market appears to be one of the core beneficiaries of this technology.

Electrician and Plumbers are thought to be key in providing expertise during domestic installations. It is the political view of this type of energy generation that results in grants and financial aid becoming ever-more prevalent. Gaining installation certification across these areas can only provide further opportunity and job security to anyone already in related fields or looking to retrain. To cover both ends, you could consider electrical or plumbing training along with green systems.

(C) 2009 – S. Edwards. Visit Click HERE or Green Engineer Certification.

Helpful Articles