1 Ski Boot Ski Gear

Tanning bed bulbs, as used in salon tanning beds, are a big part of the mystery of the perfect suntan. You can have any depth of tan you want with the wide variety of bulbs available for tanning beds. There are deep-tanning lamps, bronzing bulbs, face lamps and plenty of others too. These high-tech bulbs utilize the latest technology to tan you safely.

Furthermore, there are different kinds of bulbs for each kind of skin too. The sun bed industry produces different lamps for from dark to light skin colours. Besides that, you can decide to have a light tan, a golden tan, a bronze tan, or the deepest tan imaginable. You can even swap the type of bulb, as your tan progresses, so that you can have all kinds of quite stunning results.

A tanning lamp is like having your own sun in a bottle. In fact, it is even better, because you can control it! Modern tanning bed lamps are manufactured to the highest specifications and are also very safe. The tanning industry and the government have set strict guidelines to guarantee your safety. So, if you carefully follow the instructions supplied with the product, you may feel confident that you will not be putting your health at risk to look like a film star.

The UV rays they emit are well within prescribed safety limits to make sure you stay healthy and tanned. Furthermore, there are plenty of choices open to you, ranging from UVB and UVA combinations to pure UVA. It is your choice! So, why not get a little extra tan?

Tanning bulbs are ultraviolet-emitting units that act as the primary component of the different types of tanning beds and booths on the market. Tanning bed bulbs have as their main use the enhancement of a cosmetic tan, although these bulbs also have a reputation for the successful treatment of eczema and psoriasis. The depth and type of the tan produced, depends on the spectrum of light emitted by the tanning lamps and the vast majority of them give out more ultraviolet light than the sun does.

Nearly all tanning lamps use a device called a ‘ballast’ to regulate their power consumption. The ballast stabilizes the flow of electrical current inside the lamp and is required to ensure that the bulbs use only the necessary amount of wattage that they need in order to work effectively.

There are various types of sunbed lamps on the market including reflector sunbed bulbs and high output lamps. Most bulbs fall into two main categories: high pressure and low pressure types. (Within the tanning industry, it is customary to refer to high pressure tanning lamps as bulbs and low pressure tanning bulbs as lamps). Both high and low pressure tanning bulbs require a lack of oxygen in its housing.

High pressure tanning bulbs range in length from three to five inches and operate with 250 to 2,000 watt ballasts, although 400 watt high pressure tanning bulbs are the most common. They are usually included in the face tanning compartment of a tanning bed. High pressure tanning bulbs are most often manufactured from quartz glass and an extra specialized coating, which is essential to filter out the lethal UVC ultraviolet rays.

These HP tanning bulbs, containing mercury or argon, produce ultraviolet light in high concentration. Handling high pressure tanning bulbs requires a great deal of care, because even a tiny amount of oil from your hands will cause the bulb to fail prematurely. High pressure tanning bulbs should be replaced after about 1,000 hours even though they will shine for up to ten times longer.

Low pressure tanning lamps are much like normal fluorescent tubes, but the glass tube of low pressure tanning bulbs naturally filters out the harmful UVC ultraviolet rays. Low pressure bulbs have a useful lifespan of between 600 and 1,600 hours with 1,000 hours being the norm again.

Do you want to discover more about tanning bed bulbs? If so, just go over to our web site on tanning bed bulbs

Helpful Articles