1 Ski Boot Ski Gear

Tanning bed bulbs, as used in up-market tanning beds, are a big part of the mystery of that Hollywood tan. You can have any depth of tan you desire with the wide variety of bulbs available on the market for sun beds. There are deep-tanning lamps, bronzing bulbs, face lamps and plenty of others besides. These high-tech lamps utilize the latest technology to tan you comfortably and in safety.

Furthermore, there are different sorts of lamps for every kind of skin too. The tanning bed industry produces different lamps for from dark to light skin colours. Besides that, you can decide to have a soft tan, a golden tan, a bronze tan, or the deepest tan imaginable. You can even change the kind of lamp, as your tan progresses, so that you can have all types of quite stunning results.

A tanning lamp is like having your own sun in a bottle. In fact, it is even better, because you can control it! Modern tanning bed bulbs are made to the highest standards and are also very safe. The tanning industry and the government have implemented strict guidelines to guarantee your safety. So, if you carefully follow the instructions supplied with the product, you can be sure that you will not be putting your health at risk to look like a film star.

The UV rays that they emit are well below the proscribed safety limits to ensure you remain healthy and tanned. Furthermore, there are plenty of choices open to you, varying from UVB and UVA combinations to just UVA. It is simply up to you. So, why not give the sun a helping hand?

Sun lamps are ultraviolet-emitting devices that act as the main element of the different kinds of tanning beds and booths on the market. Sun bed lamps have as their main purpose the enhancement of a cosmetic tan, although these bulbs also have a reputation for the successful treatment of eczema and psoriasis. The depth and colour of tanning produced depends on the spectrum of light produced by the tanning bulbs and the vast majority of them produce more ultraviolet light than the sun.

Practically all sunbed lamps use a device called a ‘ballast’ to regulate their power consumption. The ballast stabilizes the flow of electrical energy inside the lamp and is needed in order to make sure that the bulbs take only the necessary amount of wattage that they require in order to work effectively.

There are various types of sunbed lamps on the market including reflector sunbed lamps and high output lamps. The majority of bulbs fall into two main categories: high pressure and low pressure types. (Within the tanning industry, it is usual to refer to high pressure tanning lamps as bulbs and low pressure tanning bulbs as lamps). Both high and low pressure tanning bulbs have a lack of oxygen inside its housing.

High pressure tanning bulbs range in length from three to five inches and operate with 250 to 2,000 watt ballasts, although 400 watt high pressure tanning bulbs are the most common. They are usually included in the face tanning compartment of a tanning bed. High pressure tanning bulbs are most often manufactured from quartz glass and an extra specialized coating, which is essential to filter out the lethal UVC ultraviolet rays.

HP tanning bulbs contain a small amount of mercury or argon and create ultraviolet light in high amounts. The handling of high pressure tanning bulbs should be performed very carefully and never with naked hands, because even a tiny amount of oil from your hands will cause the bulb to fail prematurely or even break and the resultant spillage of mercury is potentially very serious. High pressure tanning bulbs should be changed after roughly 1,000 hours although they will continue to produce light for up to 10,00 hours

Low pressure tanning lamps are much like normal fluorescent tubes, but the glass tube of low pressure tanning bulbs naturally filters out the harmful UVC ultraviolet rays. Low pressure bulbs have a useful lifespan of between 600 and 1,600 hours with 1,000 hours being the norm again.

Helpful Articles